 |
|
|
|
Many fiber glass fabrics will require
finishing which is determined by the particular application or end
use of the fabric. Fabrics which are not finished are called greige,
loom state, or untreated fabrics.
- Removal of the sizing and binder that was applied to the glass
fibers to facilitate weaving. This is accomplished through heat
cleaning, scouring, or other specialized methods. After cleaning,
the fabric may be treated with chemical agents which interact
with the chemistry and processes used by our customers or may
be left as is.
- Sizing and binder may be left on the fabric with various chemical
agents applied directly over the greige/loom state fabric.
- 208 Comparable
to 603A but pigmented red to indicate non-asbestos material.
- A218 Special processing
for surfboard fabric which improves wetout, clarity, and laminate
strength.
- 231 PVC
Weaveset - medium add-on
- 236 PVC
Weaveset - high add-on
- 252 Acrylic
Weaveset - medium add-on
- 261 Patented
flame-retardant, low toxic, low smoke, white paint-like finish
for navy board
and acoustical
fabrics.
- 263 Acrylic
Weaveset - with good slitability - high add-on
- 263F Firm version of
263
- 271 PVAC
acrylic copolymer white weaveset used mainly in roofing
- 272 Same
as 271 but black
- 273 Same
as 271 but yellow
- 274 A firm
low add-on acrylic weaveset with low smoke flame retardant properties.
- 318 Low
toxic, low smoking, high reflective, pre-painted white ceiling
board finish. Colors
available
as 318x finishes.
- 373 Chemical
resistance consisting of polymer/PTFE
- 422 White
PVC/Acrylic weaveset for laminated window shades.
- 445 Alkali
resistant finish for cement reinforcement
- 460
Finish compatible with epoxy and phenolic resins
- 497A A silane finish
that can undergo addition or condensation reactions with polymeric
resins.
Is compatible with epoxy, phenolic, polyimide, and polyester resins.
- 501 Thermal
cleaning finish, designed for silicone laminates (formerly called
112), used
with styles
104 and 106. Fabric is normally white in color.
- 504 Volan
Chrome complex finish compatible with polyester and epoxy resins.
- 508A
Finish compatible with epoxy, phenolic, and polyimide resins
- 514 Neutral
pH, recommended for silicone laminates.
- 516 Silane
finish over thermal cleaned fabric for melamine laminates.
- 517 Continuous
heat cleaning finish (formerly 210). Fabric is normally tan in
color.
- 538 Soft
A-1100 silane finish compatible with epoxy, phenolic, and polyimide
resins.
- 550 Combination
of Volan and silane coupling agents compatible with polyester
and epoxy
resins.
- 558 A finish
based on Z-6040 silane compatible with epoxy resins.
- 537 Thermal
cleaning finish, designed for silicone laminates, used with styles
other than
104 and
106. Fabric is normally white in color.
- 580 Triple
finish consisting of silicone oils/graphite/PTFE
- 581 Weaveset
for paintable ceiling board fabric.
- 602 Modified
silane finish for superior wet-out specialty resin applications.
Good for
polybutadiene
- 603A Multi-purpose pad
covering and lagging finish, providing good hand, minimal dust,
and ease
of application.
- 610A Pre-applied rewettable
lagging finish that is water activated and provides ease of
application.
- 615 10%
add-on of DuPont's Teflon® B
- 618 Scouring
process for removal of extractable material (to less than 0.1%),
maximizing
resin compatibility.
- 621
High performance finish for epoxy and polyimide resins
- 625 Acid
resistance consisting of acid resistant polymers/PTFE/silicone
oils, graphite
- 627 A silane
finish compatible with polyester and vinyl ester resins.
- 629 Lower
add-on of 318
- 633 Water
resistant finish.
- 636 High
impact, soft formable finish for polyester resins
- 642 Good
moisture resistance and electrical properties with good wet-out.
Developed for
FR-4 epoxy
but also recommended for polyimide, BT, and Cyanate Ester.
- 643 Developed
for multilayer and bonding sheets applications but also good for
general
epoxy FR-4
applications. Exhibits very good wet-out characteristics.
- 646 Low
chloride silane finish for multilayer and bonding sheets applications.
Also general
epoxy FR-4
applications. Exhibits very good wet-out and moisture resistance.
- 644 Modified
Z-6040 silane finish for epoxy resins.
- 654 Scour and water repellent finish for ballistic
Kevlar
- 656 Scour finish for ballistic Kevlar
- 832V A light add-on
soft acrylic weaveset to improve fabric processing in laminating.
- 832W A medium add-on soft
acrylic weaveset to improve fabric processing in laminating.
- 818P Polyester weaveset,
high add-on
- 971C Flame retardant
coating for smoke curtains.
- 975 PVA
weaveset which reduces fabric porosity and aids slitting and sewing.
- 983 High
temperature ceramic coating.
|
| |
|
|
|
|
|
|
|
Fabric & Data Sheet Search
Detailed Search for Fabric and Data Sheets.
 search now
|
|
|